一种地月转移轨道中途修正的制导算法

针对地月转移轨道中途修正问题，提出了一种求解修正速度增量的制导算法。该算法由初值设计和精确解求解两部分组成。首先，利用伪状态理论，通过简单迭代设计中途修正的初值，并通过Vinti预报方法修正了地球扁率的影响。然后，在求解精确解时，提出了一种基于伪状态理论的状态转移矩阵解析算法。该算法通过设计高精度的初值，降低了求解地月转移轨道中途修正问题的难度，而且避免了传统数值方法计算状态转移矩阵的复杂性。数值仿真结果表明，该算法可有效求解中途修正问题。     

Methane pyrolysis in preparation of pyrolytic carbon: Thermodynamic and kinetic analysis by density functional theory

The density functional theory has been successfully applied in analyzing pyrolytic carbon deposition by methane pyrolysis from the view of thermodynamics and kinetics based on a total number of 39 elementary reactions. M06-2X/def2-TZVP level was employed to optimize species structures and locate the transition states. The enthalpy changes and Gibbs free energy changes of all the reactions in the temperature range of 298.15–1800 K were derived with optimized species. Results show that the reacting temperature should be above 1200 K based on the equilibrium constant analysis, which is consistent with the typical reaction temperature adopted in experiments. Potential energy surface profiles report that radical attacking reactions have lower energy barriers than those direct decomposition reactions, especially hydrogen radical attacking reactions. The energy barriers of the first steps, dehydrogenations of methane and ethylene, are 272.4 kJ·mol⁻¹ and 288.9 kJ·mol⁻¹ at 1200 K, which are very close to the experimental activation energy for methane pyrolysis. The most favorable decomposition reaction path is the path of hydrogen radical attacking reactions. The highest energy barrier of the path at 1200 K is 185.7 kJ·mol⁻¹ presented by the C–H bond breaking in ethynyl attacked by hydrogen radical.     

基于MFC的拉扭复合系统界面设计

为了方便对拉扭复合系统中2台伺服电机的控制,设计了基于MFC的上位机界面。通过串口通信,使用不同的按钮操作设置伺服驱动器相应参数,从而控制2台伺服电机的运行。上位机实时接收伺服驱动器监控数据绘制出转速、位移、转矩曲线。针对在数据接收过程中信息帧接收错误的情况,使用拼接两相邻错误信息帧的方法进行修复。结果表明:上位机界面实现了系统功能及对电机运行工况的监控。     

散射对高温气体-碳黑颗粒混合物辐射传输的影响

基于全光谱k分布(Full spectrum k distribution,FSK)模型、MIE理论和有限体积法(Finite volume method,FVM),构建了均温、均质辐射参与性气体-碳黑颗粒混合物介质热辐射传输模型,并分析了碳黑不同尺寸、不同体积浓度以及介质不同路径长度和不同温度条件下,因忽略碳黑颗粒散射所导致的介质热辐射传输特性(如辐射热流、辐射源项)的计算误差。研究结果表明:体积分数不变,增大粒径,计算误差呈现出先增大后减小的趋势;数密度不变,增大粒径,或者粒径不变,增大体积分数,均将使得计算误差相应增大;粒径、体积分数不变,增大路径长度,或者升高介质温度,均将增大计算误差。通常对于含有大颗粒、高碳黑浓度的辐射参与性气体-碳黑颗粒混合物介质,碳黑颗粒散射不能忽略。     

Quantitative assessment and visualization of flight risk induced by coupled multi-factor under icing conditions

Aircraft icing has been proven to be one of the most serious threats to flight safety. During the analysis of flight risk under icing conditions, quantitative assessment and visualization of flight risk are quite essential as they provide safe manipulation strategies in intricate conditions. However, they are rarely studied. Since the icing flight accidents are the result of the coupling of multiple unfavorable factors, in present study, we have proposed a method to quantitatively assess flight risk induced by multi-factor coupling under icing conditions by Monte-Carlo simulation and multivariate extreme value theory. The results demonstrate that the flight risk probability increases with the rise of unfavorable factors. Besides, a flight risk visualization method named flight safety window has been presented to build the flight risk distribution cloud maps in different complex conditions. The cloud maps show that the icing would give rise to atrophy of the safety scope, and the consequence would be even more severe when coupled with other more unfavorable factors. The proposed methods in this study would be useful in flight risk analysis under icing conditions and can enhance the pilot's situational awareness in selecting correct strategies within the safety zone to avoid unsafe manipulation.     

超静超稳卫星碰振动力学建模

针对分离式卫星载荷模块(PM)受到扰动时可能与服务模块(SM)发生碰撞的问题，综合音圈电机反电动势(back-EMF)和柔性线缆动力学的效应，基于牛顿欧拉法建立了分离式卫星(DFP)载荷模块动力学模型。基于Hertz接触理论，推导了分离式卫星碰撞过程中连续接触力模型，并分析了碰撞过程中产生的接触力对载荷模块指向精度和指向稳定度的影响。数值仿真结果表明，碰撞使得载荷模块指向精度和指向稳定度下降5个数量级，碰撞后载荷模块可再次恢复到超静超稳工作状态，恢复时间超过1400 s。本文建立的碰撞模型对研究分离式卫星碰撞规避和碰撞控制具有重要意义。     

低轨天基信息定向分发区域分割编码控制方法

为提高低轨指向性信息分发链路的频谱利用效率，从天基分发平台与地面用户的相对位置关系入手，建立了分发指向、编码增益与信道传输容量的量化关系。在此基础上，提出一种低轨天基信息定向分发区域分割编码控制方法，该方法针对不同信息分发区域，采用最小均方误差(MMSE)作为区域分割准则选择编码方式，既提升了信道传输效率也便于工程实现。最后，本文通过仿真分析了方法的效能和性能影响因素，并与现有自适应编码方法进行了对比，验证了本方法的有效性和可靠性。     

基于听觉感知的驾驶舱信息提示设计研究

为研究飞机驾驶舱中不同的听觉信息提示方式对感知效率、关注程度影响差异,基于飞行仿真场景构建飞行任务,在任务执行中提供听觉刺激提示,采集被试任务全过程中的脑电信号并进行了时域和频域维度的分析,对比语言听觉/非语言听觉以及不同播报速度的工效影响,总结了被试对驾驶舱听觉信息提示的反应特征,为听觉信息提示的人机交互设计提供参考建议.     

一种面向复杂体系作战的多源信息融合处理方法

研讨了面向复杂体系化作战的信息融合技术，提出了一种基于中心航迹关联的融合架构，设计了面 向多源异构数据的信息融合处理方法。经过多机飞行场景下的数据仿真测试，能够有效解决多源传感器多目标 环境下目标关联判断问题。     

复合导引头目标信息融合抗干扰技术研究

复合导引头由微波制导至红外制导的过程中,受干扰条件的影响,有可能出现错误交班。为了提高导引头应对干扰的能力,设计了一种微波/红外目标信息融合抗干扰方法,该方法利用微波与红外目标信息进行关联度检测,对跟踪微波与红外运动的趋势进行在线实时判断,及时做出干扰误交班判定。在进行了干扰误交班的情况下,MATLAB数字仿真结果表明,该算法能够准确有效地给出干扰误交班判断,从而保证了在干扰环境下对目标跟踪的稳定性。